Turning tool holders
To hold a turning insert, a turning tool holder must be used. Turning tools usually have a square shank (20x20mm shank or 25x25mm being the most popular in the UK) and are made from steel. Depending on the insert shape, geometry and size, the type of turning tool used will differ in terms of clamp style, approach and shank size.
Our company are one of the largest stockist of high quality turning tools. We stock double clamp, multi-lock, lever lock, top clamp and screw clamp turning tool holders, all made by chia. For negative turning inserts, we always recommend using DOUBLE CLAMP turning tools instead of lever lock. Double clamp offer the most secure clamping, preventing insert lift and eliminating vibration. Double clamp turning tools can increase insert tool life by as much as 40% whilst improving surface finish. The most popular turning tool is the PCLNR/ DCLNR for CNMG turning inserts
T16N/T22N Circlip Grooving Tools
|
Ordering Code |
Dimensions(mm) |
Insert |
Insert Screw |
Torx Key |
Anvil |
Anvil Screw |
Hex Wren |
|
Left Hand |
h |
b |
H |
F |
L |
|
SEL1212F16 |
12 |
12 |
12 |
16 |
80 |
T16N.. |
L60M3.5×12 |
T-15 |
GM-16 |
MQ030080 |
T10 |
|
SEL1616H16 |
16 |
16 |
16 |
20 |
100 |
T16N.. |
L60M3.5×12 |
T-15 |
GM-16 |
MQ030080 |
T10 |
|
SEL2020K16 |
20 |
20 |
20 |
25 |
125 |
T16N.. |
L60M3.5×12 |
T-15 |
GM-16 |
MQ030080 |
T10 |
|
SEL2525M16 |
25 |
25 |
25 |
32 |
150 |
T16N.. |
L60M3.5×12 |
T-15 |
GM-16 |
MQ030080 |
T10 |
|
SEL2525M22 |
25 |
25 |
25 |
32 |
150 |
T22N.. |
L60M4.5×14 |
T-22 |
EGM-22 |
MQ040080 |
S2.5 |
|
SEL3225P22 |
32 |
25 |
32 |
32 |
170 |
T22N.. |
L60M4.5×14 |
T-22 |
EGM-22 |
MQ040080 |
S2.5 |
|
SEL3232P22 |
32 |
32 |
32 |
40 |
170 |
T22N.. |
L60M4.5×14 |
T-22 |
EGM-22 |
MQ040080 |
S2.5 |
Ordering example:SER2020K16 1pc
|